15
UMD-SRB01
Version 4
DO NOT TAMPER WITH THE CONTROL BOX
If it does not allow the brakes to reset then
there is still a problem with the lift!
Rectify the problem and the controller will allow a reset.
Correct Wiring of the Sockets
Spare Core (violet)
wrapped around 8 core
cable (in case of future
mods)
8 core cable
Cable screen
sheathed and
terminated to earth
Black wire removed
to show correct use
of boot lace crimps
Screened cable
connected with main
earth cable
SAFETY NOTE:
Do not leave the lift to run in engineer “bypass mode”, this is purely a function
to allow you to carry out maintenance on the lift without triggering uncontrolled
movement. You will have circumvented the part of the safety circuit.
