ATTO Technology iPBridge 1550, Installation And Operation Manual

Page: 51 / 72

42
CLI commands
SpeedWrite
When enabled, improves the performance of SCSI WRITE
commands to SCSI devices attached to the iPBridge.
Specify SCSI bus (sb), target (st), LUN (sl) of a mapped
SCSI device or (all) for each currently mapped device.
set SpeedWrite SCSI [sb st sl | all] [enabled|disabled]
get SpeedWrite SCSI [sb st sl | all]
SpeedWriteDefault
When enabled, SpeedWrite performance enhancement is
set as the default for any subsequent SCSI devices
mapped manually or via an AutoMap operation. If
disabled, the iPBridge does not enable SpeedWrite
performance enhancement to newly-mapped SCSI
devices.
Default: disabled
set SpeedWriteDefault [enabled | disabled]
get SpeedWriteDefault
Time
Controls the time for the iPBridge if SNTP has been
disabled or is not available.
set Time [HH]: [MM]: [SS]
Requires a SaveConfiguration command
get Time
TimeZone
Controls the time zone for the iPBridge if SNTP has been
disabled or is not available. Choices are EST, CST,
MST,
.
PST or numerical offset from GMT in the form of
+/-:HH:MM.When SNTP is enabled, the iPBridge
applies the time zone setting to the time retrieved from a
specified SNTP time server to determine local time.
Default: EST
set TimeZone [ [EST | CST | MST | PST] [+ / - HH :MM ] ]
Requires a SaveConfiguration command
get TimeZone
Username
Specifies user name for all Telnet, FTP and ExpressNAV
web server sessions.The
username is case insensitive, 1-
32 characters, no spaces You must have the Admin
password to change
Username .
Default: root
set Username [username]
Requires a SaveConfiguration command
get Username