ATTACK AWP 25, Instructions For Use Manual

Page: 19 / 100

18
Note:
The above mentioned fact is relevant by the operation with WOOD .
By the operation with PELLETS it is not relevant, as the boiler does not have to be connect-
ed to the accumulation tank, if ONLY PELLETS would be used.
Standardly delivered accumulation tanks ATTACK*
AK AS HR HRS TUV TUVS S SS
300 300 — — 300 300 — —
400 400 — — 400 400 — —
500 500 600 600 500 500 500 500
800 800 800 800 600 600 800 800
1 000 1 000 1 000 1 000 800 800 1 000 1 000
1 500 1 500 1 250 1 250 1 000 1 000 1 250 1 250
2 000 2 000 1 500 1 500 1 250 1 250 1 500 1 500
2 500 2 500 2 000 2 000 1 500 1 500 2 000 2 000
3 000 3 000 — — 2 000 2 000 — —
4 000 4 000 — — — — — —
5 000 5 000 — — — — — —
AK –
standard accumulation tank intended for the accumulation of energy of the heating water
AS –standard accumulation tank intended for the accumulation of energy of the heating water,
equipped with a coil for connection of the solar panels
HR – combined accumulation tank for accumulation of energy of the heating water and the do-
mestic hot water preparation
HRS – combined accumulation tank for accumulation of energy of the heating water and the
domestic hot water preparation, equipped with a coil for connection of the solar panels
* The volume necessary for the accumulation of energy can be covered by one or by several ac-
cumulation tanks. The accumulation tanks can be connected together to create the sufficient
volume of water for accumulation. Thereby, if you decide for a volume of 2.000 l, it is possible to
use one tank of 2.000 l or two tanks of 1.000 l connected together. The required way of connec-
tion is given in the chapter „Recommended hydraulic schemes of boiler connection“.