35
Setting up Remote Communication
5.
The PAV3 is network-ready and can be viewed and
a.
controlled with VNC Viewer software. ATS strongly
recommends contacting a network administrator
to set up this feature.
Using VNC Viewer software requires two IP
b.
addresses (within 1/100 of each other), a subnet
mask, and a gateway for each PAV3 on the
network.
HMI IP Address: ____.____.____.____
i.
RM IP Address: ____.____.____.____
ii.
Subnet Mask: ____.____.____.____
iii.
Gateway: ____.____.____.____
iv.
The HMI IP Address is the address of the touch
c.
screen controller.
The RM IP Address is the address of the RM inside
d.
of the PAV. These two addresses need to be within
1/100 of each other to communicate.
Default settings are:
i.
HMI IP: 172.16.1.99
1.
RM IP: 172.16.1.100
2.
Sub: 255.255.255.0
3.
Check IP addresses and settings in
e.
three
places.
i.
On the PAV display, press View/Languages
menu.
1.
Check the different languages
and the IP addresses:
HMI - 172.16.1.99 and
RM - 172.16.1.100.