Atrump AL52, Operation & Maintenance Manual, Page: 95 / 110

7-15
Mechanism
7.4 The Fully-Enclosed Splash-Guarding Enclosure
A fully-enclosed sheet metal enclosure is designed to isolate the running machine
and the cutting coolant and flying chips it generates from the operator. Chips are
conveyed to the chip-collecting bucket through the chip conveying tunnel. The
circulating cutting coolant is pumped through the coolant filters to the coolant
distributors. Ensure to clean the coolant filters frequently. The sheet metal
enclosure is designed to have a 2-pieces front door so that you can inspect the
machine or install the workpiece easily.
Note : Ensure to close the 2-pieces front door before starting up the machine. The
running machine will be stopped if the front door is opened in order to protect the
operator from flying chips, spraying cutting coolant and running machine.
Nevertheless, make sure the machine is fully stopped before entering inside the
sheet metal enclosure.