Atrump AL52, Operation & Maintenance Manual, Page: 53 / 110

3-4 Shipping/Handling and Installation
3.2 Machine Lifting
This AL52/AM52 vertical machining center is composed of headstock, tool magazine,
main column, working table, saddle, bed base, operation panel, pneumatic system,
lubrication system, electrical cabinet and CNC unit. Those components are connected
with electrical cables and/or pneumatic pipelines.
During transportation, the machine body and coolant tank are packed separately. The
shipping and handling equipment used should be able to lift a gross weight
AL52/AM52 of 10.5 tons at least. Due to weight of the machine, it is recommended to
lift this machine with crane, and use only the sling frame provided by us. Nevertheless,
read Operator and Maintenance’s manuals thoroughly before lifting the machine.
Note : Use only the sling frame provided by us to lift the machine.
3.2.1 Precautions before Lifting the Machine
3.2.1.1 Ensure that strength of the cables can sustain the weight of the machine.
3.2.1.2 Ensure the lifted machinery package is in balance before starting to move it.
3.2.1.3 Abrupt changes in lifting & lowering speed might cause unexpected damage
on the machinery package and are therefore prohibited.
3.2.1.4 Use only the sling frame provided by us to lift the machine. Because the sling
frame is optional, therefore, please contact our local dealers if it is needed.
3.2.2
Lifting with the Machine Packed
3.2.2.1 Using Fork-lifting Truck
3.2.2.1.2 The loading capacity of the forklift should be at least AL52/AM52 of 10.5
tons The AL52/AM52 packed machine is 438 cm in length, 270 cm in width
and 301 cm in height. Ensure nobody is in the way and the path is clear
before moving the packed machine.
3.2.2.1.3 Ensure lifting forks are in an appropriate position and the package is in
balance before proceeding.
3.2.2.1.4 Beware that the lifting truck might be overturned because of an improper
lifting height.
3.2.2.1.5 Always assign a person to guide the way to ensure safety.