Atrump AL52, Operation & Maintenance Manual, Page: 79 / 110

Lubrication
6-7
Operation's & Maintenance Manual EV-860/1050
6.3
The Oil Guide Table
Lubricant
Position Track and Ballscrew
(Optional) Track and Ballscrew
(Standard)
Cutting Coolant
Lubricant
Characteristic
Grease 1)Viscosity :ISO VG68
2)Anti-wear,
Anti-pressure 1)Good Heat
conduction
2)Good lubricant
performance
Lubrication
Method Oil gun Centralized Lub. Circulating Lub.
Oil Change
Period
As needed 12 months As needed
Tank Capacity
4 L
AL52/AM52
：
344L
Recommended
Grade of Oil
1)Kluber Lubrication
lsoflex Nbu 15
2)Shell Alvania No.2 1)B.P Energol NT 68
2)Mobil Vactra No.2
3)Esso Febis K68
4)Shell Tonna T68
5)Chevron Way
Lubrica NT68 1)CPC Cutting Oil 31C
2)Mobile Esultran
3)Esso Pennex 44
or Kulwell 30
or Dortan 32
4)Shell Dromus B
or Macron 32
Lubricant
Position Spindle Refrigeration and
Gear Box Lubrication F.R.L.
combination
Pressure Cylinder
Lubricant
Characteristic
1)Viscosity :ISO VG32
2)Viscosity index :above 95
3)Anti-rust, anti-oxidation
4)Good Stability 1)Viscosity :ISO VG32
2)Anti-rust, anti-oxidation
3)Good Stability
LubricationMethod Circulating Lub. Oil feeder
Oil Change
Period Every year (3 months for
new machine)
As needed Every year
Tank Capacity
20 L 0.3 L
Recommended
Grade of Oil
1)CPC Circulation R32
2)Mobil DTE Light
3)Daphne Super Multi 68
4)Shell Turbo T32 or Tellus 32
5)Esso Auto A32 1)B.P Energol HLP 32 AW
2)Mobil DTE 13
3)Esso AutoA32
4)Shell Tellus 32
5)Chevron Ed Hydraulic 32
For the circulation oil for spindle oil cooler from KAUKAN, CPC circulation R10
can get better performance than R32. We fill up R22 while machine is shipped out.
Notes:
1) If the oil becomes milky white, separate the oil and the water, then refill
with some fresh oil.
2) Replace oil that becomes less viscous.
3) Ensure that the inlet of the pumps are cleaned and cleared through
periodic inspection.
4) Change the oil seal or the packing after some time, since this causes
leakage.
5) Expel the air inside the loops through any bore to avoid noise or vibration
generated by hydraulic motion.