Atrump A1-3T, Operation Manual, Page: 32 / 37

32
5.5 Other Problems:
Issues Reason Solution
Machine misalignment The ground leveling bolt
is not set properly
Adjust the leveling bolt
again, please refer
chapter 3.4 “Machine
Leveling”
Leveling blocks defected
more than
2 pieces.
Replace leveling blocks
and do not exceed
pieces.
The floor
foundation is not
reinforced. Rebuild foundation.
Air regulator drain
out water too often
There is too much
water from air
compressor.
Install an air dryer or
filter unit.
Air pressure is not
enough to cause
machine shot down
often.
Air pressure from
compressed air is lower
than 6 kg/cm2
Replace larger capacity
of air compressor.