Atrump A1-3T, Operation Manual, Page: 25 / 37

25
CHAPTER 4
Maintenance
4.1 Maintenance Schedule
This machine has been equipped with switches, buttons and meters for
adjustment. Please read the machine manual carefully to understand any
device functions which are shown below:
Periodically
I
TEMS
DAILY
▲
Keep the working area clear before and while
operating.
▲ Please run all 3 axes full travel in low RPM for
10~20 minutes and check if there is any unusual
noise sound and situation.
▲ Check lube pump and air regulator oil tank level.
▲
Check automatic drain water at air regulator unit
(The tank should be empty.)
▲
Clean chips from way covers, Splash pan, and tool
changer.
▲
Wipes spindle taper with clean cloth and apply light oil.
▲
Check the oil of spindle chiller is sufficient or not.
▲ Check the oil pump apply sufficient way oil and pump
properly for all slide way. If machine sit for long time not
operate, make sure the oil pump work properly.