APD series bench scale
APD_01_11.05_EN_U
4
2. MAIN TECHNICAL SPECIFICATIONS
POWER SUPPLY
6Vdc trough 110-240 Vac 50-60Hz adapter or rechargeable battery (6V – 4,5 Ah).
NOTE: recharge the battery using only the adapter provided.
MAXIMUM POWER
5 VA
OPERATING TEMPERATURE
From -10 to +40 °C (14 to 104 °F) (with even temperature).
DISPLAYED DIVISIONS
10000e, 3X3000e for legal for trade use expandable to 800.000 for internal use
(with
minimum
signal coming from the 1,6mV/V cell).
MAXIMUM INPUT SIGNAL
6 mV/V.
MINIMUM VOLTAGE PER DIVISION
0.3
µ
V (approved instrument); 0.03
µ
V (non approved instrument).
RESOLUTION IN CALCULATION
1'500'000 points (with signal in input equal to 3mV/V).
KEYBOARD
Water resistant polycarbonate mechanic keys with tactile and acoustic feedback.
PROTECTIVE CASE OF THE
ABS console (IP 65 protection)
INDICATOR
BODY OF THE SCALE AND Stainless steel.
WEIGHING PLATE
TARE FUNCTION
Available on the entire capacity.
AUTO POWER OFF
Programmable from 1 to 255 minutes, or disinserted.
LOW BATTERY WARNING
“Low Batt “ will appear on the display.
BATTERY RECHARGE TIME
12 hours.
LOAD CELL POWER SUPPLY
5Vdc ± 5%, 120mA (max 8 cells of 350 Ohms)
LOAD CELL CONNECTIONS
6 wires (CELL1) with Remote Sense, 4 wires (CELL 2, 3, 4) without Remote
Sense.
THE PARTS OF THE INSTRUMENT CONTAINING DANGEROUS ELECTRICAL TENSION ARE ISOLATED AND
INACCESSIBLE TO THE USER UNLESS IT HAS BEEN DAMAGED, OPENED, OR ALTERED.
3. SYMBOLS
To call the attention of the user, the following symbols are used both in the manual and on the instrument itself:
WARNING! This operation must be performed only by qualified personal.
Conforms to the standards of the European Union.
Identifies the Class Of Precision defined by the OIML to represent 3000 divisions.
“TECH.MAN.REF.”
means that an advanced function is being described (therefore for the technical personnel) which
will be further explained in the corresponding technical manual.
