APD series bench scale
APD_01_11.05_EN_U
3
1. INTRODUCTION
The purpose of this manual is to help the user get to know the scale’s various functioning modes, the keys’ functions and
the display indications. It is possible that one may incur into the phrase
“TECH.MAN.REF.”
: this means that an advanced
function is being described (therefore, for the technical personnel) and which is further explained in the corresponding
technical manual.
We advise to carefully follow the instructions for programming the scale; by taking actions not indicated in this
manual, one could cause the scale to not work properly.
In addition to having all the characteristics of a high precision scale, the instrument has the unit of measure / pounds
conversion function and the weighs totaliser.
The scale adapts itself to normal weighing applications in either industrial settings, such as during factory production
processes, or that of commerce, such as legal for trade applications.
This manual has been made as carefully and exactly as possible; in any case, your suggestions are always
welcome.
WARNING
Any attempt to repair or alter the unit can expose the user to the danger of electric shock and it will void our warranty. This
instrument is covered under warranty provided that
IT HAS NOT BEEN OPENED BY THE USER
for any reason. If any
problem with the unit or system has been experienced please notify the manufacturer or the dealer from which the
instrument was acquired.
The 6V rechargeable battery has to be completely recharged (12 hours) in the first installation of the instrument;
we RECOMMEND disconnecting the battery if the instrument is not going to be used for more than 30 days.
In order to avoid the deterioration of the rechargeable battery:
In standard conditions:
- never leave the battery partially or completely uncharged; at least once a week recharge it completely.
In case the instrument is not used for a long period, one needs to:
- completely recharge the battery before the system is switched off for the last time;
- recharge completely every 3 months.
Do not pour liquids on the indicator
!!!!
Do not use solvents to clean the indicator
!!!!
Do not expose instrument to either direct sun light or any heat sources
!!!!
Always mount the indicator and platform in a vibration free setting
!!!!
Read carefully & apply what described in the POWER SUPPLY AND START-UP section!
Do not install in an environment with any risk of explosion
!!!!
All the connections of the instrument have to be made respecting the rules applicable in the zone
and in the installing environment.
Everything not expressly described in this manual has to be considered as improper use of the
equipment.
The crossed-out wheeled bin on the product means that at the product end of life, it must be taken to
separate collection or to the reseller when a new equivalent type of equipment is purchased. The
adequate differentiated refuse collection in having the product recycled, helps to avoid possible
negative effects on the environment and health and supports the recycling of the materials of which the
equipment is made. The unlawful disposal of the product by the user will entail fines foreseen by the
current regulations.
