MB52XX Modbus Gateway
User Manual
Configuration
and
Setup
as the New Password
).
The password is case sensitive and limited to a maximum of 8 characters
.
After entering
all required fields, click
Save Password
button to save the change
.
After the
Save Successfully
message showed
up, the user will be prompted with a pop
-
up window to enter the
User name
and the
New Password
again for
verification
.
Figure 4.30 Security Web Page
The user can limit how the Modbus Gateway is accessed and controlled by changing the settings under the
Security
box in Figure 4.30
All password
-
protected features will use the same password whose setting is described in the
previous paragraph
.
The user can enable or disable
Web Console
by clicking on the corresponding radio button
.
Additionally, the user can protect how the user accesses the device with a
Reset Button Protect
option by checking
on either
No
or
Yes
radio buttons
.
After Security Settings are set, click
Save Configuration
to save all changes that have been made
.
A
Save
Successful
message will appear with a hyperlink asking to
restart
the device as shown inFigure 4.10
Please click
the
restart
hyperlink to apply the changes
.
Then, a message indicating
System Restarting
status with a countdown
will show up
.
After a successful restart, the web browser will be redirected to the Overview page as shown in Figure
4.9.7
Import
/
Export
Once all configurations are set and the device is working properly, the user may want to backup
(
Export
)
the
configuration to a file
.
A backup configuration file can be used when a new firmware is uploaded and the device is
