47
fooTSWITcHES
CONTINUED . . .
VoLUME:
Toggles the VOLUME effect between ACTIVE and BYPASSED .
gRAPHIc EQ:
Toggles the GRAPHIC EQ effect between ACTIVE and BYPASSED .
PRE fILTER:
Toggles the PRE FILTER effect between ACTIVE and BYPASSED .
PARAMETRIc (1, 2, ANd 3):
Toggles the PARAMETRIC (1, 2, AND 3) effect
between ACTIVE and BYPASSED .
AMP bYPASS:
Toggles the amp modeling on and off .
coMPRESSoR:
Toggles the COMPRESSOR effect between ACTIVE and
BYPASSED .
TAP TEMPo:
Allows you to set the ECHO delay time and GLOBAL BPM value by
tapping the tempo with your foot to select a quarter note BPM . In this mode, the
footswitch LED blinks red at a rate that represents the quarter note delay time of
the ECHO effect .
PRESET INc:
Increment the current preset by one . Will wrap around from 128 to
1 if you reach the end of the preset bank . Press and hold to cycle quickly through
presets .
PRESET dEc:
Decrement the current preset by one . Will wrap around from 1
to 128 if you reach the start of the preset bank . Press and hold to cycle quickly
through presets .
cHoRUS:
Toggles the CHORUS effect between ACTIVE and BYPASSED .
fLANgER:
Toggles the FLANGER effect between ACTIVE and BYPASSED .
PHASER:
Toggles the PHASER effect between ACTIVE and BYPASSED .
TREMoLo:
Toggles the TREMOLO effect between ACTIVE and BYPASSED .
bANK +10:
Increment the currently selected bank by 10 . After a press, AMPLIFIRE
will flash the currently selected BANK and wait for the user to press one of the
switches assigned to an OFFSET (see below). Times out after 5 seconds.
bANK -10:
Decrement the currently selected bank by 10 After a press, AMPLIFIRE
will flash the currently selected BANK and wait for the user to press one of the
switches assigned to an OFFSET (see below). Times out after 5 seconds.
after pressing these (banK +10 / banK -10), you can press any numbered
foot switch to get the preset… even if those footswitches are assigned to other
functions. this way, you don’t tie them up to access presets via bank mode!
offSET 1-9:
Select the preset indicated by the specified offset for the currently
selected bank For example, if you are presently in bank 20 and specify a
footswitch to an offset of 3 then pressing that switch will select preset 23 .
offSET 1/6 - 5/10:
Toggles back and forth between two different offset banks
of 5. For example, if you are presently in bank 20 and specify a footswitch to the
offset of 1/6 then pressing that switch will toggle between presets 21 and 26 .
This lets you use one row of 5 buttons to access a bank of 10 presets .