39
PARAMETER SETTINgS
CONTINUED . . .
fREQUENcY MIN (kHz):
Sets the minimum frequency of the WAH-WAH filter effect
sweep . This is the resonant frequency of the filter when the PEDAL parameter is in
the minimum 0% (heel) position.
fREQUENcY MAX (kHz):
Sets the maximum frequency of the WAH-WAH filter effect
sweep . This is the resonant frequency of the filter when the PEDAL parameter is in
the maximum 100% (toe) position.
TYPE:
Choose the type of filter for the WAH effect . Some WAH-WAHs use a
BANDPASS type, but some use a high-peaking LOWPASS type . Each has its own
character:
LoWPASS:
Selects a variable low-pass filter . The WAH pedal controls the cutoff
frequency . This mode preserves the low end of your guitar even when the pedal it
put into the higher positions .
bANdPASS:
Selects a variable band-pass filter . The WAH pedal controls the center
frequency . This mode results in a more nasal and mid-rangey tone . It reduces the
low end of your guitar when the pedal it put into the higher position .
Q:
Adjusts the “Q” or peaking of the filter. Increase this value for a thinner, more nasal,
and crisper WAH sound . Lower this value for a more subtle and rounder WAH sound .
LEVEL (db):
Sets the output LEVEL of the WAH when the effect is enabled . This
allows you to automatically add clean boost to your WAH when it is enabled .
AUTo-off:
This is a GLOBAL parameter.
Enables the AUTO-OFF feature of the WAH
effect. Most real WAHs have an on/off switch. Most expression pedals don’t. To solve
this issue, we created an AUTO-OFF feature which can bypass your WAH effect
automatically when the pedal is parked or inactive for a period of time .
dISAbLEd:
Turns off the AUTO-OFF feature, and your WAH is only manually
controlled by the ENABLE parameter .
INAcTIVITY:
Selects INACTIVITY AUTO-OFF mode . In this mode, the WAH will
automatically turn off when the WAH PEDAL parameter is not changed more
than the THRESHOLD amount during an interval of time specified by the TIMER
parameter. (see THRESHOLD and TIMER parameters below).
PARKEd:
Selects PARKED AUTO-OFF mode . In this mode, the WAH will
automatically turn off when the WAH PEDAL parameter is kept below the
THRESHOLD amount during an interval of time specified by the TIMER parameter .
(see THRESHOLD and TIMER parameters below).
TIMER (milliseconds):
This is a GLOBAL parameter.
Sets the AUTO-OFF timeout time .
When the AUTO-OFF feature is enabled, this parameter sets the amount of time for
the WAH to automatically shut off when the PEDAL is either inactive or parked .
THRESHoLd (0-100%):
This is a GLOBAL parameter.
Sets the AUTO-OFF threshold for
inactivity or parked position . If the PEDAL changes less than this amount then it is
INACTIVE . If the PEDAL remains below this amount then it is PARKED .