13
dEScRIPTIoNS
CONTINUED . . .
• The EQ block is made up of the GRAPHIC EQ and three (3) PARAMETRIC EQ
effect modules, each of which can be placed in the PRE or POST sections of
the signal chain. These options can be set in the GRAPHIC EQ, PARAMETRIC 1,
PARAMETRIC 2, and PARAMETRIC 3 effect menus.
• The cHo/fLA/PHA/TRE blocks represent world-class classic CHORUS,
FLANGER, PHASER, and TREMOLO effects, and can be placed before or after the
AMP block for maximum flexibility.
• The EcHo effect can be assigned either before or after the AMP block to get
the different effects of feeding an echo into an amp or processing echoes after
the amp tone, respectively. The ECHO features multiple modes of operation
including a MULTITAP mode with the ability to utilize up to 4 independent delays
at once.
EffEcTS AfTER THE AMP
Placing certain effects after the AMP block allows you to apply any standard STEREO
effects processing along the lines of studio post-processing .
these include:
cAbINET ModELINg
The CABINET section is where AMPLIFIRE applies Impulse Response (IR) modeling
technology and filtering to simulate the sound of real-life speakers and guitar
cabinets as recorded by specific microphones . Each of the amp models in AMPLIFIRE
contain a “matched” built-in IR cabinet, but you are free to mix and match to create
YOUR tone . AMPLIFIRE also supports user-customizable IR cabinets which you can
upload to AMPLIFIRE via USB .
• The CABINET modeler can be configured to use any cabinet from the list of amp
models, or any one of the user-defined cabinets.
• The CABINET modeler lets you tweak the cab models with filters specially
designed for adjusting microphone and loudspeaker cabinet tones.
• The CABINET modeler can be enabled or disabled on either set of outputs
independently (MAIN / AUX), allowing you to use full range systems AND other
real guitar cabinets simultaneously.
• The CABINET modeler is always enabled on the headphones output (although
you can choose to disable the cabinet modeling on all outputs for three separate
full range outputs).
• The EQ blocks
• The cHoRUS/
fLANgER/PHASER/
TREMoLo blocks
• The EcHo block
• The REVERb block
• The VoLUME block
• The coMP block