MS120
ATOLL ELECTRONIQUE
Page 11
6 - PREAMP / BYPASS FUNCTIONS
Your appliance can be used as a preamplifier allowing you to manage the volume control and selection of the
different sources. It can also be used as a single source (BYPASS led switch on).
To use the streamer as a preamp on BYPASS mode, press key BYPASS (39) of the remote for about 4 seconds. You
can do the same directly from the front panel while pressing about 4 seconds on keys VOL
+
& (21).
VOLUME:
CONNECTION:
Volume management is done through the keys (21) of the front panel or on the remote control. The volume
level is displayed a few seconds on the display. The level is always shown at the top of the display.
Particular case:
Affect line1 or line2 as the only BYPASS input (for home cinema system insertion):
In PRE-AMP mode you can choose to assign a line input (line1 or line2) as an exclusive bypass input. Simply
select one of these inputs and then activates the bypass mode, inputs remain in preamp mode except that
particular line input.
As a preamplifier, the streamer can be directly connected to a power amplifier. In that case, ensure you never
turn your device on BYPASS mode.
(Check scheme p6)
The volume at zero corresponds to a complete "mute" of the device with switching of the output relay.
Your appliance has 6 inputs:
– Line 1
– Line 2
– Coaxial 1
– Coaxial 2
– Optical 1
– Optical 2
NB.: selected source always follows on the display of
(*)
.
SOURCES:
When you need to search for a special track or radio, you’ll need to press on “Search”, then “Searching for”,
then indicate it, valid while pressing “OK” and then press “Search”.
On music web services (
Tidal, Qobuz, Deezer
) you can add filters on your research (All/Title/Albums/Artists/
Playlists). Use your phone, tablet or computer as a remote control for
Spotify
.
“SEARCH” OPTION:
These sources can be renamed from the
ATOLL Signature
application: Settings/Rename local inputs.
7 - APPLICATIONS
A free application for iPad, iPhone, and Android
is available to drive your Streamer named
ATOLL
Signature
. You can download it freely online.
As a first step, make sure that your Smartphone is
well connected to WIFI on the same network as your
Streamer. In this case, your device will appear on
the screen of your Smartphone just after starting the
application, just select it.
The application will resume the data displayed on the
screen the Streamer: logo of the radio station, audio,
volume, covers of albums, and images.
You can navigate through the menus and adjust the
analog volume level.
Our applications can be regularly updated so can be improved in their functionalities.
It is also possible to control your network drive from a computer screen by typing in the search bar of your
internet browser the IP address of your network drive followed by /webclient:
192.168.xxx.xxx/webclient
The IP address of your network drive is available in the “Settings/Network info” menu.
It is also possible to rename your network drive by typing only the IP address of the latter in the search bar of
your internet browser.
