OWNER’S MANUAL ~
STREAMER
ATOLL ELECTRONIQUE
Page 8
WIRELESS:
ANOTHER POSSIBILITY TO CONNECT: BY THE ATOLL SIGNATURE AND SOFTAP APPLICATION:
1- Download the ATOLL Signature application on a smartphone or tablet.
2- Connect your smartphone to the “Softap” WIFI network.
3- Launch the ATOLL Signature application.
4- In the Settings / Network configuration / Wireless configuration / Scan menu, select your internet box then
enter the WIFI password.
5- Reconnect your smartphone to the WIFI network of your internet box.
In this case, your appliance will be able to find the Wireless connections available in your home.
Advice:
We advise you to use the WPS button to connect your appliance to your WIFI network.
Press on the WPS button of your internet receiver and then on the WPS button of the remote control (30).
Display shows “WPS in progress” then when the connection is made display shows “connected”.
If the WPS is not possible, press on “scan”. You’ll see the possible WIFI network available in your place. Select
yours and, if needed enter the WIFI key.
NB.: In some environments (buildings), several networks can be present. Make sure you choose yours.
Enter, in CAPITAL LETTERS and without space, the WIFI security key which appears below your internet box.
Confirm your password by pressing the “OK” button (33).
This symbol indicates the link wireless as well as the strength of the signal.
NETWORK INFO:
LANGUAGES:
In this menu, you’ll find all information about the network: type of network, IP address, Mask, Gateway, DNS…
This menu allows you to select the language of all menus. You can choose between:
English, German, Spanish, French, Italian, Nederland, Russian, Polish.
This menu allows toy yo make an update your appliance. Select “Check for update” some time to time. If there
is no update, the display will show “No new updates”.
If an update is available, the devices will automatically launch it. This may take several times so let the device
run until it starts again.
FIRMWARE UPDATE:
VERSION:
FACTORY RESET:
STREAM AUDIO QUALITY:
DISPLAY
POWER MANAGEMENT:
This menu displays the software version installed in the device.
This menu allows you to restart the device with the factory settings. If you press it, the appliance will start again
and in the English version. Note that some menus will be refreshed such as PlayQueue or the Favorites Internet
radios.
This menu allows you to choose the quality of the audio files between 24 bits/192 kHz or 24 bits/96 kHz.
In the case of low internet, bandwidth prefers 24 bits/96 kHz quality to avoid any cuts during reading files.
This menu allows you to choose the intensity of the display between Off, Low, Medium, or High.
If you select “Off“ the display will always get off after few seconds. The display will always get on while
pressing any keys or buttons.
This function is also available directly from the key DISP (37) of the remote control.
This menu allows to choose the standby timeout :
– When the device is not working (choice between 5,10, 15, or 30 minutes).
– When the device is working (choice between 1, 8, or 24 hours).
