MS120
ATOLL ELECTRONIQUE
Page 7
5 - USES
GETTING STARTED
SETTINGS
Before switching on your appliance, connect the network cable (RJ45) to input (11).
For much better results and best performances, we highly recommend to uses a wired connection better than
a WIFI connection.
Wait for the start-up screen to appear before any manipulation.
You can then use the navigation buttons (17) on your remote control or on the front panel to select the menus.
On the first connection (or changes in the network configurations) you will have to check the network settings
of your appliance. If this setup is not perfectly settled, some of the functions of the streamer (internet radios or
reading music of your server) will not be operated.
Available menus:
NOTE.:
Network configuration starts immediately when an RJ45 cable is linked (11).
– Go to the “Settings” menu then to “Network connection”.
– Select the “Network Wizard” menu.
– You will have to choose the type of network. Press “Network type” and choose “Automatic”, “Wired”,
“Wireless” or “Hybrid”.
WIRED:
If you already plugged the network cable, the device will indicate that the appliance is connected
The symbol
indicates that the wired link is established.
If not, configure the network while choosing “Configure Wired” and then “Manual”. Here you can enter
directly the IP address.
NETWORK CONFIGURATION:
