Atmospheric Water Systems dewpoint DH9, Owner'S Manual

Page: 36 / 46

32
Trouble Shooting
Water output is too weak
Clean the filter inside the spigot or replace.
To change Spigot or Spigot Screens:
Gently unscrew Spigot. 1.
2. Check Spigot Filters to make sure they are not clogged.
NOTE: The Spigot comes with 4 filters placed inside. If water continues flow
slowly, remove two of the screens. New Spigot come with only two screens.
3. Replace Spigot if necessary.
No hot or Cold water
The heating element is only activated when the top tank water •
level (allot) reads ‘3’.
The cold water element is only activated when the top tank water
•
level (allot) reads ‘3’.
Humidity readings are not consistent
A humidity difference of 5% or more is normal from one sensor to
another.
Excessive vibration or noise
Check the drip tray to make sure it is secure. •
Open the front panel and make sure all the filters are secure. •
Problem