33
Check copper tubing from the compressor to make
•
sure it is not touching any of the side panels.
Turn off and unplug your Dewpointe.
4.
Pull the Dewpointe away from the wall so you can
5.
access the back.
Remove screws from the lower back panel and
6.
remove panel.
Check the copper tubes to see if they are coming
7.
into contact with any hard surfaces.
NOTE: Copper tubes may be very hot.
8.
Push the Compressor towards the Bottom Tank
and away from the back of the machine.
NOTE: The copper tubes can be easily damaged. If you
suspect a defect or shipping damage, please contact
customer service immediately.
There is a burning smell
Immediately turn off your Dewpointe and contact
•
customer service.
[email protected] | (866)-857-5074
If this occurs while draining the unit, STOP. Allow the
•
unit to cool down before continuing.
Problem
Trouble Shooting
Covered Copper Tubing
Uncovered Copper Tubing
4
9
8
Summary of Contents for dewpoint DH9
