manualshive.com logo in svg

Atmos Scope, Operating Instructions Manual

Share
Download
Atmos Scope Operating Instructions Manual Download Page 25

25

Operation

4 

Operation

4.1 

Use/operation

•  Handle the system with utmost care as it contains sensitive optical, mechanical, 

and electronic components.

•  Do not knock the distal end against hard surfaces.
•  Do not knock or drop the ATMOS Scope, and protect it from blows and impacts.
•  Do not bend, kink, pull, or squeeze the insertion and distal tube. The outer 

sheath and inner components could become damaged.

•  Never move the tip of the distal tube or tip cover glass against resistance. The tip 

contains components that may scratch or break when used incorrectly.

4.1.1 

Switching on and adjusting the system

1. 

Take the flexible ATMOS Scope in your hand.

 

&

The system turns on.

4.1.2 

Functions of the buttons with the ATMOS Capture Suite

When using the ATMOS Capture Suite Basic software, the upper button is "Trigger 

snapshot" and the lower button is "Video Start/Stop".

Summary of Contents for Scope





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands