manualshive.com logo in svg

Atmos Scope, Operating Instructions Manual

Share
Download
Atmos Scope Operating Instructions Manual Download Page 16

16

Notes for your safety

•  You can only disconnect the device from the power supply by pulling out the 

power cable.

•  Position the device in such a way that you can easily disconnect it from the PC/

laptop at any time.

•  Never touch the power plug or power cable with wet hands.
•  Use only original accessories and original spare parts from ATMOS.
•  Follow the instructions regarding periodic tests (see chapter “6.1 Periodic tests” 

on page 40).

• 

Assembly, new settings, modifications, extensions, and repairs may only be 

carried out by authorized persons.

•  Do not modify the device without the manufacturer’s permission.
•  During prolonged use of the ATMOS Scope, the distal endoscope tip can heat up 

to 53.5 °C.

•  Never leave the patient unattended near the device.

Keep the device fully functional at all times.

Malfunctions could cause injury to you and your patients.
• 

Please observe the notes on the electromagnetic compatibility (EMC) of the 

device.

• 

ATMOS recommends: Only use original ATMOS software.

Summary of Contents for Scope





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands