manualshive.com logo in svg

Atmos E 341, Operating Instructions Manual, Page: 50 / 60

Share
Download
Atmos E 341 Operating Instructions Manual Download Page 50

50

Accessories

8.0  Accessories

Accessories

REF

Serres

®

 outer canister 1 l

312.0465.0

Medi-Vac

®

 outer canister 1 l

312.0473.0

DDS canister system 1 l, complete

318.1000.0

Wall and device support for ATMOS

®

 emergency suction devices

318.1250.0

Retrofit kit DDS canister system

318.1350.0

Retrofit kit Serres

®

 canister system

318.1450.0

Retrofit kit Medi-Vac

®

 canister system

318.1650.0

8.1  Wall and device support

Affix the power supply and recharging unit

Prerequisite: The velcro fastener 

1

 is attached to the wall and device support.

 Damaged cable due to incorrect mounting. 

1.  Please ensure that the power supply and recharging unit are positioned with the 

writing towards the wall or the standard rail. Otherwise the cable could be clamped.

2. 

Affix the parts 

2

 and 

3

 and fix the cable 

4

 with the velcro fastener 

1

.

1

2

3

     

4

Wall mounting

 

Only affix the power supply and recharging unit after you have marked the holes to 

be drilled.

 

Screws are not included in delivery.

1.  Only use screws (max. 4 mm), which are suitable for the material of the wall.
2.  Position the wall and device support at an easily accessible place.
3.  Check whether the wall is smooth and vertical at the mounting position.
4.  Hold the wall and device support to the mounting location and align it with a spirit 

level.

5.  Mark the holes to be drilled on the wall.
6.  Drill the holes with a, the wall material and the chosen screws corresponding drill.
7.  Mount the power supply and recharging unit to the wall and device support. The 

power supply and recharging unit must not be connected to the mains supply.

8.  Screw the wall and device support to the wall with suitable screws. 
9.  Connect the power supply and recharging unit to the mains supply.
10. Check whether the charging accessory is correctly attached by installing the device.

Summary of Contents for E 341





























































Reviews:

No comments