20
Setting up and starting up
Connection
When you pour 50-100 ml water or disinfectant into the secretion canister, then it is
easier to clean.
1
2
4
3
1
Inner canister lid
2
Float ball compartment
3
Float ball
4
Outer canister lid
1. Press the outer canister lid
4
on the inner canister lid
1
, until it clicks into place.
2.
Open the float ball compartment
2
gently and insert the float ball
3
.
3.
Gently press the float ball compartment together.
4.
Check whether the float ball moves easily and does not fall out of the float ball
compartment.
5.
Place the secretion canister on a firm surface.
6. Press the canister lid onto the secretion canister. The canister lid cannot be placed
in a wrong position.
7. Press the canister lid tightly with both hands as far as it will go onto the secretion
canister.
8. Place the sealing ring
6
onto the filter holder
5
.
6
5
6
9.
Insert a new bacterial filter
7
onto the filter holder
5
.
5
7
6
10.
Insert the filter holder into the canister lid and turn it clockwise until it clicks into
place.
11. Connect the suction hose to the canister system.