manualshive.com logo in svg

Atmos E 341, Operating Instructions Manual, Page: 5 / 60

Share
Download
Atmos E 341 Operating Instructions Manual Download Page 5

5

Introduction

1.2  Explanation of pictures and symbols

In the operating instructions

 DANGER

Warning of a danger which causes immediate death or serious injury. Observe the 

necessary measures.

 WARNING

Beware of a danger which can cause death or serious injury. Observe the necessary 

measures.

 CAUTION

Beware of a danger which can easily hurt you. Observe the necessary measures.

 

NOTICE

Indication of a danger where the product or other items can be damaged. Observe 

the necessary measures.

Warning of a danger which can cause death or serious injury.
Information regarding possible material damage which can be caused.

Useful information on the handling of the device.

1.

Action. Go step by step

•    Numeration.

 

»

 

Result of an action.

Move, plug in this direction.

click

Engage, check correct fit.

On device and type plate

Follow operating instructions 

(blue)

Observe operating instructions

Manufacturer

Manufacturing date

SN

Serial number

IP34D

Degree of protection

REF

Order number

KB

Short term operation

Professional disposal

Application part type BF

Protection class II

PATIENT

Connection suction hose/patient 

(Serres

®

 canister system)

This product complies with 

the relevant requirements of 

the EU Directives

For single use only (Symbol is on 

the consumables)

Summary of Contents for E 341





























































Reviews:

No comments