Atmos Audio Cube 31 Operating Instructions Manual Download Page 14

Page: 14 / 52

Setting up and starting up

3.6 Connecting the device

1. Connect the device to a PC with a USB cable.
2. Connect the device to a correctly installed earthing socket via a power cable.

3.7 Installing the software

The partition, where the software is to be installed must have read and write access.

You will require administration rights in order to install the software on your com-

puter.

1.  Check whether your computer meets the system requirements.
2.  Connect the supplied USB fl ash drive to the PC.
3.  Right click on the fi le

install

exe

and select the menu item

administratOr

4. If you are requested enter your administrator-login details.

The software starts.

Set the following:

•

Language

• Installation path

•

Software to be installed

Depending on the software the programme automatically selects the necessary

software components (driver).

Click on the button

nstallieren

install

The software will be installed. The current status is displayed at the bottom left.

As soon as the installation is complete the message

nstallatiOn

COmplete

appears at

the bottom left.

7. Perform a function check: Chapter „6.3 Weekly function check“ on page 37.

3.8 Installation of the ATMOS

PatSoft 31

As soon as you exit the section

ptiOns

, you will be asked if you want to save the

settings. Click the button

, to save the settings or the button

, not to.

Summary of Contents for Audio Cube 31





















































Search results

Summary of Contents for Audio Cube 31

Reviews:

Brands by name

Popular brands

Atmos Audio Cube 31, Operating Instructions Manual

Search results

Summary of Contents for Audio Cube 31

Reviews:

Brands by name

Popular brands