Atmel AVR2052, Quick Start Manual

Page: 50 / 67

50
Atmel AVR2052
8200M-AVR-11/11
Parameter Value Note
IDE Eclipse IDE for C/C++ ,
YAGARTO toolchain (GCC 4.5.1
(1)
) and AT91-ISP v1.12
OR
IAR Embedded Workbench for
ARM 6.20 (with IAR C/C++
Compiler for ARM
v6.20.3.52642
(1)
)
Required to develop
applications using the API
(see Section 5.2 ) and upload
firmware images through
JTAG
Java virtual machine Java Runtime Environment
(JRE) 6, or later
Required to run
WSNMonitor application
Note: 1. Users are strongly encouraged to use the specified version of the YAGARTO
and/or IAR toolchains. Other versions are not supported, and may not work.
12.1.4 Installing the SDK
Proceed with the following installation instructions.
1. Download the archive to your PC and unpack it into an empty folder. The
following SDK folders and files will be created.
Table 12-3. The SDK file structure.
Directory/file Description
<SDK-Root>\Documentation Documentation for the Atmel BitCloud software
<SDK-Root>\Evaluation
Tools\WSNDemo (Embedded)
Ready-to-use image files for evaluating
WSNDemo. Refer to Section 12.3 for a
description of the images
<SDK-Root>\Evaluation
Tools\WSNDemo (WSN
Monitor)\WSNMonitorSetup.exe
WSNMonitor installer
<SDK-Root>\BitCloud\Components Header files for the BitCloud stack
<SDK-
Root>\BitCloud\Components\BSP\
Source, header, and library files for the
BitCloud BSP
<SDK-Root>\BitCloud\lib Library files for the BitCloud stack
<SDK-Root>\Applications\ Source codes for the sample applications
<SDK-Root>\Third Party
Software\6119.inf
USB-to-serial converter driver
2. Install the selected IDE
a. For Eclipse IDE and YAGARTO:
a. Install Eclipse IDE for C/C++ [23] , if not already installed on
your PC.
b. Install YAGARTO ARM cross-compiler toolchain [24] , if not
already installed on your PC. Be sure to install only the
supported version of the YAGARTO toolchain, as specified in
Table 12-2 .
b. For IAR Embedded Workbench ARM:
a. Install IAR Embedded Workbench for ARM [22] , if not already
installed on your PC.