Atmel AT43DK370, User Manual

Page: 36 / 57

Building Firmware for the AT43DK370 Development Kit
5-10 AT43DK370 USB Host/Function Dev. Kit User Guide
3423C–USB–1/04
There is a 1000-character limitation in the length of the text string. If string length
exceeds 1000, simple break up the string into two or more short string and repeat the
UART0XmitStr().
After editing the source files, if the user choose to re-compile only a single or a few
selected files, right-click on the down-arrow icon at the right-most end of each of the
files, and then select Touch (Figure 5-10).
Figure 5-10.
File Touch Selection
The user can then go on the Project > Make and that will compile the touched files only.
Once the output file is created (ICE mode axf file, Flash/Download mode hex files), it is
p l a ce d i n to th e d i re c to ry C :\ Pr o g r a m F il e s\ At m el U SB \A T 4 3 D K3 7 0 \So ft -
ware\USBP_Library_Rev_x.x_Template\USBP_Library_Data\DebugRel, under the
previous assigned file name (see Figure 5-5 on page 7 and Figure 5-11 on page 11).
Use the USB Clinic to download and execute this firmware. Every time an output is gen-
erated, a Work_Directory_Name_Data directory is created that stores the output files.
In this case, Sample_DLVer_Data is the output directory.