Atmel AT43DK370, User Manual

Page: 32 / 57

Building Firmware for the AT43DK370 Development Kit
5-6 AT43DK370 USB Host/Function Dev. Kit User Guide
3423C–USB–1/04
The following window appears on the screen.
Figure 5-4.
DebugRel Settings Window
The left-hand side of the DebugRel Settings window contains available options includ-
ing Target, Language Settings and Linker. Go to Linker > ARM Linker > Output.
There is a Scatter description file prompt in the ARM Linker window. Click on
Choose, and go to USBP_Library_Template > ks32c50100_port directory and select
the ks32c50100_scat_l file to set the proper Scatter file path.
The DebugRel Settings window is also important for other settings such as, first, the
setting for generating Intel 32 bit Hex format files for USB Clinic download executables.
To generate the correct file format, the ADS configuration must be properly set.
In the DebugRel Settings window, check for ARMfromELF under Linker. If ARM-
fromELF does not exist, go to Target > Target Settings. Under the Target Settings
window, go to Post Linker and select ARMfromELF. The ARMfromELF should then
appear under Linker. Go to Linker > ARMfromELF.
In the ARMfromELF window, go to the Output format prompt and set the Hex output
format to Intel 32 bit Hex. In the same window, the user can also specify the output
name by typing it in the Output file name prompt as shown in Figure 5-5.