Atmark Armadillo-IoT Gateway G3 Product Manual Download Page 14

Page: 14 / 129

1.7. Exporting

• When exporting this product, it is the responsibility of the exporter to follow all export-related laws and regulations

of Japan and related foreign countries, and carry out all required procedures.

• Our product may not be exported or sold etc. to nations, organizations, corporations or individuals under sanctions

or trade suspension by Japan and other related countries.

• Our product and related technology may not be used for the purpose of development of weapons of mass destruction,

for the purpose of military use or other military related uses, or in devices which have had their production, use, sale
or procurement prohibited by national or overseas law or regulations.

1.8. Trademarks

• Armadillo is a registered trademark of Atmark Techno, Inc. All other company names, product names and related

trademarks are the property of their respective owners. ™ and ® marks are omitted.

• The SD, SDHC, SDXC, microSD, microSDHC, microSDXC and SDIO logos are trademarks of SD-3C, LLC.

Armadillo-IoT Gateway G3Product Manual - INTL

Precautions

Summary of Contents for Armadillo-IoT Gateway G3

































































































































Search results

Summary of Contents for Armadillo-IoT Gateway G3

Reviews:

Related manuals for Armadillo-IoT Gateway G3

Brands by name

Popular brands

Atmark Armadillo-IoT Gateway G3, Product Manual

Search results

Summary of Contents for Armadillo-IoT Gateway G3

Reviews:

Related manuals for Armadillo-IoT Gateway G3

Brands by name

Popular brands