Atlona junox AT-JUNO-451 Manual Download

Page: 26 / 32

AT-JUNO-451

Updating the Firmware

Updating the firmware can be completed using either the USB interface or the web GUI. Atlona recommends

using the web GUI for updating the firmware. However, if a network connection is not available, the AT-JUNO-451

firmware can be updated using a USB-A to USB mini-B cable.

Using the Web GUI

Requirements:

• AT-JUNO-451

•

Firmware file

• Computer running Microsoft Windows

Connect an Ethernet cable from the computer, containing the firmware, to the same network where the AT-

JUNO-451 is connected.

2. Go to the

System page (page 24)

in the web GUI.

3. Click the

Choose File

button, under

Firmware Update

Browse to the location of the firmware file, select it, and click the

Open

button.

5. Click the

Update

button to begin the update process.

Choose File button

6. The following message box will be displayed.

7. Click the

button to begin the firmware update process. Click the

Cancel

button to cancel the process.

After the firmware update process is complete, the

Login

screen will be displayed.

Appendix

Summary of Contents for junox AT-JUNO-451

































Search results

Summary of Contents for junox AT-JUNO-451

Reviews:

Related manuals for junox AT-JUNO-451

Brands by name

Popular brands

Atlona junox AT-JUNO-451, Manual

Search results

Summary of Contents for junox AT-JUNO-451

Reviews:

Related manuals for junox AT-JUNO-451

Brands by name

Popular brands