AT-JUNO-451
12
1.
Connect an HD/UHD source to each of the four HDMI inputs (
INPUT 1
-
INPUT 4
).
2. Connect an optical audio cable from the
OPTICAL
port to a sound bar or other audio output device.
3. Connect an Ethernet cable from the
LAN
port to the Local Area Network (LAN). Ethernet cables should use EIA/
TIA-568B termination.
Connection Instructions
Installation
5. Connect the included four-pin captive screw connector to the
RS-232 / IR IN
port. Refer to
RS-232 / IR
Connector (page 11)
for wiring information, if necessary.
6. Connect the included 5 V DC power supply to the
DC 5V
power receptacle.
7. Connect the power supply to an available electrical outlet.
IMPORTANT:
Stranded or patch cable is not recommended due to performance issues.
Sheilded cables are strongly recommended to minimize signal noise and interference.
