Atlona AT-UHD-CLSO-824, User Manual

Page: 28 / 33

28
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Each command is terminated with a carriage return.
Feedback is terminated with a carriage return and line feed.
Note: If the command fails or is incorrect the feedback should be “Command FAILED”
IP Commands
Command Feedback Description
IPCFG IP Addr : x.x.x.x
Netmask : x.x.x.x
Gateway : x.x.x.x
IP Port: x.x.x Displays IP address configuration
IPTimeout XX IPTimeout XX
(Ex. IPTimout120) Determines amount of seconds of inactivity before TCP/IP
disconnects
IPQuit IPQuit Logs out of TCP/IP
IPAddUser TCP/IP username & password list:
- user password
- user password
- user password Will display a list of users
IPAddUser X Y TCP/IP user was added Add a user for TCP/IP control. X=User Y=Password
Ex. IPAddUser Atlona 1234 (User=Atlona 1234=Password)
IPDelUser X TCP/IP user was deleted Delete a user from TCP/IP X=User (Ex. IPDelUser Atlona)
IPDHCP sta IPDHCP sta
Ex. IPDHCP on Displays the status of DHCP
IPDHCP on IPDHCP on Turns DHCP on
IPDHCP off IPDHCP off Turns DHCP off
IPStatic X Y Z IPStatic address netmask gateway Sets a static IP address
Ex. IPStatic 192.168.1.1 255.255.255.0 192.168.1.200
IPPort X IPPort X Set the TCP/IP port (ex. IPPort 230)
IPLogin sta IPLogin sta
e.g.
IPLogin on
Displays IPLogin status
e.g.
IPLogin is on
IPLogin on IPLogin on Enables IPLogin
IPLogin off IPLogin off Disables IPLogin
Broadcast sta Broadcast sta Displays broadcast mode status
Broadcast on Broadcast on Enables broadcast mode
*
Broadcast on is the default setting
Broadcast off Broadcast off Disables broadcast mode
CtlType x
e.g. CtlType rs-232
CtlType x
e.g. CtlType rs-232
Sets the control type
x = ip, rs-232, cec
e.g. Set the control type to RS-232
CliMode x
e.g. CliMode non-login
CliMode x
e.g. CliMode non-login
Sets the control device’s IP mode
x = sta, login, non-login
e.g. Sets the IP mode to non-login
CliUser x
e.g. CliUser
CliUser x
e.g. CliUser admin
Sets the IP username for login
x = username, (blank)
e.g. Display the IP username by leaving x blank
CliPass x
e.g. CliPass AtlonA
CliPass x
e.g. CliPass AtlonA
Sets the IP password for login
x = password, (blank)
e.g. Set the IP password to AtlonaA
CliIPAddr x
e.g. CliIPAddr sta
CliIPAddr x
e.g. CliIPAddr 192.168.0.23
Sets the IP address of the controlled device
x = ip, sta
e.g. Display the IP address of the controlled device
CliPort x
e.g.
CliPort 24
CliPort x
e.g.
CliPort 24
Sets the IP port of the controlled device
x = port, sta
e.g.
Set the IP port to 24