AT-OME-SW32
21
webGUI
Network
IP Mode
- Switch between static and DHCP modes by selecting DHCP or Static.
IP, Netmask, Gateway - T
his will display the current IP settings on DHCP. When set to static, fill in the IP ad
-
dress, netmask, and gateway.
Telnet Port
- Set the telnet port if needed for control. Default port is 23.
Telnet Login Mode
- Toggle telnet login mode on and off. If on, a username and password will be required to
control the unit via TCP/IP.
Telnet Timeout
- Set the amount of time between actions before the current user is logged out. Default is 10000
seconds.
Status Broadcast
- Toggle to set the Broadcast mode
ON
or
OFF
. This provides feedback for control system
use.
Brute Attack
- Adds a layer of security to prevent users from attempting to login with incorrect credentials.
•
Maximum Retry Connection: Select the number of login attempts that are allowed before the system locks
out the username. Default is 10.
•
System Lock Time: Select the system lock-out time in minutes. Default is 3.
Hostname
- Set the name for the matrix, this will show up in network discovery.
