AT-OME-SW32
15
webGUI
7. Select A/V Settings to adjust routing and video settings.
Matrix Switching
Mirrored
- When selected from the drop down menu, both HDMI outputs will pass source signal from the same
selected source. This mode is default on.
Matrix Mode
- When selected, each HDMI Output will route source signals independently.
Matrix Mode w/static route
- Selecting this will enable the second output to auto route input signals while the
first output will stay fixed to the chosen input.
Input Selection
Depending on the swtiching mode selected, there will be one (mirrored) or two (either matrix modes) drop
down menus for selecting.
The second drop down menu will switch input signals for output two, when in static mode, it will not auto
switch when new sources are connected or powered on.
NOTE:
When Matrix Mode is selected, display control becomes inoperable and the Display tab will be
unaccessable in the webGUI.
