Atlona AT-HDVS-210H-TX-WP Manual Download

Page: 25 / 88

AT-HDVS-210H-TX-WP

Display Mode

Click this drop-down list to select the behavior of the display when a source is connected.

Setting

Description

DispSW AVon

Display switches on/off, source audio/video signal is always on.

DispSW AVSW

Display switches on/off, source audio/video signal switches on/off.

AV SW

Display is always on, source audio/video signal switches on/off;

Lamp cool

down timer (Sec.)

and

Power on delay timer (Sec.)

are ignored.

The Web GUI

TCP/IP Settings of Controlled Devices

IP Mode

Click this drop-down list to select the login mode.

Setting

Description

Non-login

Does not require a username and password when using TCP/IP to control the

display.

RS-232

Requires a username and password to control the display through TCP/IP.

IP Address

Enter the IP address of the device in this field.

Port

Enter the listening port of the device in this field.

Username

Enter the username for login. If the

IP Mode

is set to

Non-Login

, then this information will not be required.

Password

Enter the password for login. If the

IP Mode

is set to

Non-Login

, then this information will not be required.

Save

Click this button to save all changes in this window group.

Summary of Contents for AT-HDVS-210H-TX-WP

























































































Search results

Summary of Contents for AT-HDVS-210H-TX-WP

Reviews:

Related manuals for AT-HDVS-210H-TX-WP

Brands by name

Popular brands

Atlona AT-HDVS-210H-TX-WP, Manual

Search results

Summary of Contents for AT-HDVS-210H-TX-WP

Reviews:

Related manuals for AT-HDVS-210H-TX-WP

Brands by name

Popular brands