Atlona AT-HDVS-210H-TX-WP Manual Download

Page: 13 / 88

AT-HDVS-210H-TX-WP

Installation

Faceplate Removal and Assembly

The AT-HDVS-210H-TX-WP includes an optional black faceplate and wallplate. Removal of the faceplate requires

that the AT-HDVS-210H-TX-WP be disassembled from the electrical box or mud ring.

Remove the wall plate from the electrical box and slide out the AT-HDVS-210H-TX-WP assembly, as shown.

It is recommended that the Ethernet cable, connected to the

HDBaseT OUT

port, be disconnected from the unit,

to allow for easy installation of the faceplate.

Remove the four screws, holding the faceplate to the assembly, using a Phillips screwdriver. Once the screws

are removed, gently remove the faceplate by pulling it toward you.

3. Attach the new faceplate and secure it using the four Phillips-head screws.

Install the AT-HDVS-210H-TX-WP into the electrical box or mud ring. Make sure to reconnect the Ethernet cable

to the

HDBaseT OUT

port, on the back of the assembly, before reinstalling the unit into the electrical box.

Reattach the wallplate to secure the entire assembly in place.

HDMI 2

LINK

HDMI 1

HDMI 2

PWR

RS-232

HDMI 1

AT-HDVS-210H-TX-WP

HDMI 2

LINK

HDMI 1

HDMI 2

PWR

RS-232

HDMI1

AT-HDVS-210H-TX-WP

Wall cross-section

Summary of Contents for AT-HDVS-210H-TX-WP

























































































Search results

Summary of Contents for AT-HDVS-210H-TX-WP

Reviews:

Related manuals for AT-HDVS-210H-TX-WP

Brands by name

Popular brands

Atlona AT-HDVS-210H-TX-WP, Manual

Search results

Summary of Contents for AT-HDVS-210H-TX-WP

Reviews:

Related manuals for AT-HDVS-210H-TX-WP

Brands by name

Popular brands