REV: 10-12
DOC: 1310B
PAGE
6
INSTALLATION INSTRUCTIONS
LC372 SOUND REINFORCEMENT MODULE
AL-MYNA Wireless Microphone
The LC372SR includes two (2) AL-MYNA IR wireless microphones.
23
13
15
14
22
16
17
18
19
20
21
24
26
25
14
Figure 5 -
AL-MYNA
13. Microphone
High quality internal microphone is used when the unit is in the handheld or lapel configuration.
14. IR LEDs
These separate clusters of IR LEDs ensure quality communications with an AL-IRDS regardless of which
configuration the AL-MYNA microphone is in.
15. Mode Button
Used to switch the AL-MYNA from Mode 1 or Mode 2. Mode 1 is the only operating mode supported in the LAN-
com system. It is also used in conjunction with the Panic button. When both are pressed simultaneously, a signal
is sent to the system to trigger the “Panic” function, if configured.
16. Panic Button
Used in conjunction with the Mode button. When both are pressed simultaneously, a signal is sent to the system
to trigger the “Panic” function, if configured.
17. Power Button
When the AL-MYNA is Off, holding this button for 3 seconds will turn the unit on. In the On mode, holding this but-
ton for 3 seconds will turn the unit Off.
18. Mute Button
Depressing this button in Mode 1 mutes the output of the microphone. Depressing this button in Mode 2 has no
function with the LANcom system.
19. Volume Button
Depressing the UP or DOWN button in Mode 1 will raise or lower the microphone volume. Depressing the UP or
DOWN button in Mode 2 has no function with the LANcom system.
