REV: 10-12
DOC: 1310B
PAGE
8
INSTALLATION INSTRUCTIONS
LC372 SOUND REINFORCEMENT MODULE
28. Microphone Charging LEDs
These LEDs indicate the current charging status of each receptacle:
Red = Charging,
Green = Charged.
29. Battery Cover
This provides a charging location for four additional rechargeable AA size batteries.
30. Additional Battery Charging LEDs
These two LEDs indicate the current charging status of the additional battery charging locations:
RED = Charging
GREEN = Charged.
INSTALLATION
Unpack the LC372SR and accessories from the shipping carton. The LC372SR includes the following items that are
packaged with the unit.
1 – LC372SR Sound Reinforcement Module
2 – AL-MYNA IR Wireless Microphones
1 – AL-MYNA-NEST Recharging Station
2 – Lanyards for Wireless Microphones
3 – Phoenix Connector Plugs (1 x 6-pin, 1 x 9-pin, 1 x 12-pin)
4 – Ni-MH Rechargeable Batteries
2 – 10M Interconnect Cables for AL-IRDS
2 – AL-IRDS IR Receiver Dome
2 – Mounting Plates for AL-IRDS
1 – 9VDC Power Supply
4 – Rubber Feet with Screws
Standard Installation
The LC372SR is supplied with four (4) removable rubber feet for standard installation on a shelf. Attach the rubber feet
using the supplied screws as shown in Figure 7.
Figure 7 -
Rubber Feet Installation
