©20
19
Atlas Sound LP
. T
he
Atlas
“Circle
A”
, Soundolier
, and
Atlas Sound are trademarks of
Atlas Sound L.P
. IED is a R
egistered
Trademark of Inno
vativ
e Electronic Designs LLC.
All rights reser
ved.
All other
Trademarks are propert
y of their respectiv
e o
wners. No endorsement is implied. Due to continual product de
velopment, specifications are subject to c
hange without notice.
ATS0
05966 R
evA 5/1
9 D
OC1
227B
AtlasIED.com
TELEPHONE: (502) 267-7436
9701 TAYLORSVILLE ROAD
LOUISVILLE, KENTUCKY 40299 U.S.A.
Installing the 1544ZOP
Unpacking and Preparing the Unit
Unpack the unit from its shipping carton and identify any accompanying components that may have been included. The unit comes with a PA702-RMK
kit of rack ears, blank spacer and joining clips for easy mounting into a 19" rack. The components of the rack mount kit are shown in the figure below.
The unit may be mounted either singly in a 19" rack using blank spacer and rack “ears”. The unit can also be combined with a second 1544ZOP or
compatible half-rack-unit device to mount two across in a 19" rack. See the instructions that are included with the PA702-RMK kit for specifics on how
to prepare units for rack mounting using the parts in the kit.
Installing the Unit into a Rack
The one rack unit assembly prepared above should be mounted into a 19" rack using the four mounting holes on the rack “ears”.
Blank Spacer
Rack Ears
Spacer / Ear
Screws and Nuts
Joining Clips
Joining Screws
