Battery Information: Alarm Status
NO.
NO.
Items
Description
Items
Description
1
2
3
5
8
9
10
DOC
COC
TUV
UV
MOS High temperature alarm
Low environment temperature
alarm
High environment temperature
alarm
Discharge over current alarm
Charge over current alarm
Total over discharge alarm
MOS OT
EUT
EOT
6
OV
7
USOC
4
TOV
11
12
13
14
Cell over discharge alarm
Cell over discharge alarm
Low SOC alarm
Total over charge alarm
Discharge low temperature
alarm
DUT
Charge low temperature alarm
CUT
Discharge high temperature
alarm
DOT
Charge high temperature
alarm
COT
System Information Interface
NO.
Items
Description
1
2
Inverter
Language Setting
Support 10 kind of inverters , we will still upgrade.
3 Languages for setting
5.2.2 Buzzer action description
The buzzer function can be enabled or disabled by the upper computer.
It is disabled by default.
NO.
Mode
Description
1
2
Fault
Protection
Beep 0.25S every 1S
Beep 0.25S every 2S (except over
voltage protection)
Beep 0.25S every 3S (except over
voltage alarm)
3
Alarm
◆
Battery is in protection state:
◆
Battery is in normal state:
◆
Battery is in alarm:
Explanation
Explanation
5.2.3 RST key description
NO.
Mode
Description
1
2
Fault
Dormancy
BMS is in sleep state, press the key (3 ~ 6S) and release it, the protection
board is activated, and the LED indicator lights up successively from "run"
for 0.5 seconds.
BMS is in the active state. Press the key (3 ~ 6S) and release it, the protection
board is dormant, and the LED indicator lights up successively from the lowest
power light for 0.5 seconds.
BMS is active. Press the key (6 ~ 10s) and release it, the protection
board is reset, and all LED lights are on for 1.5 seconds at the same time.
3
Reset
21
