Before entering sleep, ensure that the input terminal is not connected to the external
voltage, otherwise it will not be able to enter the low power consumption mode.
Wake up:
When the system is in the low power consumption mode and meets any of the following
conditions, the system will exit the low power consumption mode and enter the normal
operation mode:
◆
Connect the charger, and the output voltage of the charger shall be greater than 48V.
(the battery voltage of 16 strings needs to be greater than 51.2V)
◆
Press the key (3 ~ 6S) and release the key.
◆
With RS232 activation.
After single or overall over discharge protection, enter the low power consumption mode,
wake up regularly every 4 hours, and turn on the charge discharge MOS. If it can be charged,
it will exit the sleep state and enter normal charging; If the Automatic wake-up fails to
charge for 10 consecutive times, it will no longer wake up automatically.
When the system is defined as that the recovery voltage is not reached after 2 days of
standby (standby time setting value) after the end of charging, it is forced to resume
charging until the end of recharging.
5.3 wireless kit(Optional)
The wireless kit is divided into three modules
:
◆
Bluetooth
◆
WIFI
◆
GSM
Each module is an independent module, which module can be confirmed by label.
Outline drawing of wireless Kit
connect using
:
◆ Insert the module into the battery wireless kit port, download the wireless kit app,
and register the account after installation.
◆
After turning on Bluetooth / WiFi / GSM, click Add dvice.
◆ The maximum connection range of Bluetooth is only 12 meters.
◆
GSM needs to plug in the corresponding SIM card and can use network services.
The installation method of SIM card is shown in the figure below
：
SIM Card
Notice
Notice
Explanation
24
