Atlas Copco ZR 200, Instruction Book, Page: 57 / 110

Misalignment tolerances
• Single direction misalignments
Axial
1
: ΔL
in 0.8
Lateral: ΔR in 0.8
Δα
2
° 0
1
= stretch or compression
2
= NO angular misalignment is tolerated!
• Combined direction misalignments
Drawing reference Description
(1) Compression
(2) Stretch
Do NOT operate outside of the black polygon.
Do NOT exceed the misalignment tolerances to avoid compensator damage! The piping
system of the customer should be designed to fit the misalignment tolerances both during
standstill and operation.
Temperature correction factors
Medium temperature
(°F)
Correction factor for maximum working pressure of
the compensator
32 1
Instruction book
AIF999999 55