manualshive.com logo in svg

Atlas Copco XAHS 447 Cd S3A APP, Instruction Manual

Share
Download
Atlas Copco XAHS 447 Cd S3A APP Instruction Manual Download Page 89

- 89 -

Available options

UNDERCARRIAGE

The undercarriage makes it possible to move the
compressor on the site with a truck to the location
where it is needed. This option exits of rubber damped
axles, four wheels and a tow bar. The wheels are also
equipped with brakes operated from the brake handle
on the tow bar.

SUPPORT MOUNTED / LARGE FUELTANKS

With the option “Support mounted” it is possible to
fix the compressor to a truck for more flexibility or to
a frame when it is to be used permanently in an
installation.

In combination with the support mounted it is also
possible to integrate larger fuel tank to get larger
intervals between two fuel supply actions.

SKID / LARGE FUELTANKS

The skid is ideal in circumstances where the site is
impossible to reach by truck. It allows transportation
by crane or fork lift truck. When on the ground it can
be pushed into the exact location.

In combination with the skid it is also possible to
integrate larger fuel tank to get larger intervals
between two fuel supply actions.

Summary of Contents for XAHS 447 Cd S3A APP

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands