Atlas Copco QAS 14, Instruction Manual

Page: 23 / 100

- 23 -
Control and indicator panel
Qc2002™
General description Qc2002™ control
panel
A1 ....... Qc2002™ display
F10...... Fuse
The fuse activates when the current from the
battery to the engine control circuit exceeds
its setting. The fuse can be reset by pushing
the button.
S20 .....ON/OFF switch
Position O: No voltage is applied to the
Qc2002™ module, the generator will not
start.
Position I: Voltage is applied to the
Qc2002™ module, it is possible to start up
the generator.
X25 .....Terminal strip
Qc2002™ Module
The Qc2002™ module is located inside the control
panel. This control module will carry out all
necessary tasks to control and protect a generator,
regardless of the use of the generator.
This means that the Qc2002™ module can be used for
several applications.
Pushbutton and LED functions
Following pushbuttons are used on
the Qc2002™
S20
F10
Q1
X1 X25
L1 L2 L3 N PE
G
Reset
Test
On
Fault
N13
F10
X25
S20
A1
ENTER: Is used to select and
confirm changed settings in the
Parameter list.
UP: Is used to scroll through the
display information and to adjust
parameter value upwards.
DOWN: Is used to scroll through the
display information and to adjust
parameter value downwards.
BACK: Is used to leave the Alarm
pop-up window, to leave the
Parameter list and to leave menu's
without change.
AUTOMATIC: Is used to put the
unit in Manual or Automatic
Operation.