Atlas Copco QAS 14, Instruction Manual

Page: 16 / 100

- 16 -
Drain plugs and filler caps
The drain holes for the engine oil, the coolant and the
plug for the fuel, are located and labelled on the
frame; the fuel drain plug at the front, the others at the
service side.
The drain flexible for engine oil can be brought to the
outside of the generator through the drain hole.
The filler cap for the engine coolant is accessible via
an opening in the roof. The fuel filler cap is located in
the side panel.
Control and indicator panel
Qc1002™
General description Qc1002™ control
panel
A1 .......Qc1002™ display
F10......Fuse
The fuse activates when the current from the
battery to the engine control circuit exceeds
its setting. The fuse can be reset by pushing
the button.
H0 .......Panel light
S20......ON/OFF/REMOTE switch
To start up the unit (locally or remote).
X25 .....Terminal strip
Qc1002™ Module
The Qc1002™ module is located inside the control
panel. This control module will carry out all
necessary tasks to control and protect a generator,
regardless of the use of the generator.
This means that the Qc1002™ module can be used for
several applications.
The drain hole can also be used to
guide external fuel tank connections.
When connecting an external fuel
tank, use the 3-way valves. Refer to
External fuel tank connection (with/
without quick couplings).
!
H0
S20
F10
Q1
X1 X25
P4 P3
0 0
20
40
80
100
200
V
A
300
400
500
Qc 1002
145
L1 L2 L3 N PE
Reset
Test
On
Fault
N13
F10
X25
S20
A1
H0
Qc 1002
145