Atlas Copco QAC 1100 Sd, Instruction Manual

Page: 9 / 64

- 9 -
Safety precautions for portable generator sets
To be carefully read and observed before moving, lifting, using and doing maintenance or repair work on the machine.
Introduction
Atlas Copco's policy is based on providing effective, safe
and reliable products to its customers.Among others, the
following factors are considered:
-
planned and intended use of equipment and their
environments of use;
- applicable rules, codes and regulations;
- equipment expected service life, based on the principle
that service and maintenance are properly made;
- supply of manual updates.
Before using any product, user should read its instruction
manual.In addition to presenting detailed instructions for
use, the manual also provides information on safety
standards, preventive maintenance, etc.
Always keep the manual with the machine in order to
facilitate its access to its operators.
Refer also to the safety precautions relating the engine and
other type of equipment that has been shipped separately,
or is listed on the equipment or machine parts.
These safety precautions are general
instructions, but sometimes they may not
be applicable to a particular machine.
Only employees with the appropriate expertise should
use, make adjustments and carry out maintenance or repair
work on Atlas Copco equipment.It is the responsibility of
the management the appointment of operators who have
the appropriate training and expertise for each task.
Level of expertise 1: Operator
An operator must have received training on all aspects
relating the use of the machine and its commands, and
should also be familiar with the safety aspects.
Level of expertise 2: Mechanical technician
A mechanical technician is trained to use the unit in the
same way as the operator.Moreover, the mechanical
technician is trained to perform maintenance and repair
works, as described in the instruction manual, and is
authorized to change values of the control system.A
mechanical technician does not perform tasks on electrical
components.
Level of expertise 3: Electrical technician
An electrical technician has the same training and skills
than an operator and a mechanical technician.Moreover,
the electrical technician is also able conduct electrical repairs
inside the machine.These operations include tasks on live
electrical components.
Level of expertise 4: manufacturer's expert
This is an expert sent by the manufacturer, or its agent, to
perform complex repairs or modifications to the equipment.
In general, it is recommended that the machine is not used
by a number greater than two operators.The existence of
more operators may create dangerous conditions of use.Take
the necessary steps to prevent access by persons not familiar
with machine and eliminate all sources of danger related to
the machine.
When mechanics handle, use, open and/or make any
maintenance tasks or repair on Atlas Copco equipment,
they should implement safe procedures and comply with
all local regulations and safety rules.The following list
presents special safety guidelines and precautions applicable
to Atlas Copco equipment.
Failure to observe safety precautions could endanger not
only persons, but also the environment and the machines:
-
endanger persons due to electrical, mechanical or
chemical accidents;
- endanger the environment due to leakage of oil,
solvents or other substances;
- endanger the machines due to running failures.
Atlas Copco assumes no responsibility for any damage or
injuries resulting from failure to observe these precautions
or lack of care required for handling, use, maintenance or
repair, even if not expressed in this instruction manual.
The manufacturer does not accept any liability for any
damages resulting from the use of non original pats, as
well as modifications, additions or conversions made
without the written approval of the manufacturer.
If any instruction of this manual does not comply with
local laws, the safer indication shall apply.
The instructions in these safety precautions should not be
interpreted as suggestions, recommendations or inference
used in violation of any applicable laws or regulations.