manualshive.com logo in svg

Atlas Copco MAS 200, Instruction Book

Share
Download
Atlas Copco MAS 200 Instruction Book Download Page 88

8

Problem solving

8.1

Problem solving

Warning

Before carrying out any maintenance, repair work or adjustment, stop the compressor,
press the emergency stop button and switch off the voltage.
Close the air outlet valve and open the manual condensate drain valves.
Open and lock the isolating switch.
The operator must apply all relevant 

Safety precautions

Control panel

Faults and remedies

A service message appears on the display (1)

Stop the compressor and carry out the indicated service actions.
Reset the message, see section 

Service menu

.

A shut-down warning message appears on the display (1)

The alarm LED (4) will light up indicating that a shut-down level is almost reached, e.g. when the
temperature at the outlet of the compressor elements becomes too high.
The message disappears as soon as the cause of the problem is remedied.

Unit is shut down

The alarm LED (4) will flash indicating that the compressor is stopped due to a shut-down function, e.g.
either that the outlet temperature is too high or that the motor overload relay has tripped.
Remedy the problem.

Instruction book

86

APF219617

Summary of Contents for MAS 200































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands