manualshive.com logo in svg

Atlas Copco MAS 200, Instruction Book

Share
Download
Atlas Copco MAS 200 Instruction Book Download Page 42

Navigation and options

• The banner shows the unit type and the language selector. In this example, three languages

are available on the controller.

• On the left side of the interface, you can find the navigation menu.

If a license for ESi is foreseen, the menu contains 3 buttons.

• Machine: shows all generator settings.
• ES: shows the ESi status (if a license is provided).
• Preferences: allows to change temperature and pressure unit.

Unit settings

All unit settings can be displayed or hidden. Put a check mark in front of each point of interest
and it will be displayed. Only the machine status is fixed and can not be removed from the main
screen.

Analog inputs

Lists all current analog input values. The measurement units can be changed in the preference
button from the navigation menu.

Counters

Lists all current counter values from controller and unit.

Instruction book

40

APF219617

Summary of Contents for MAS 200































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands