Atlas Copco GA 30+, Instruction Book

Page: 39 / 190

Overview of the screens
Digital input
screens Designation Related topic
<d. in> Digital input status
<d. 1> Running hours (hrs or x 1000 hrs) See section Calling-up running hours
<d. 2> Motor starts (x 1 or x 1000) See section Calling up motor starts
<d. 3> Module hours (hrs or x 1000 hrs) See section Calling up module hours
<d. 4> Loading hours (hrs or x 1000 hrs) See section Calling up loading hours
<d. 5> Load relay (x 1 or x 1000) See section Calling up load relay
<d. 6> Service timer reading (hrs or x 1000 hrs) See section Calling up/resetting the service
timer
<d. 7> Actual program version
Parameter
screens Designation Related topic
<P .1> Selection between local, remote or LAN
control See section Selection between Local
Remote and LAN control
<P. 2> Setting a node ID for LAN control and the
channels for Mk 4 and Mk 5 See section Calling up/modifying CAN
address control
<P. 3> Settings for IP, gateway and Subnet mask See section Calling up/modifying IP,
Gateway and Subnetmask
<P. 4> Pressure band settings See section Calling up/modifying pressure
band settings
<P. 5> Setting a pressure band selection See section Modifying pressure band
selection
<P. 6> Modifying a service timer See section Calling up/modifying service
timer settings
<P. 7> Setting of unit for temperature See section Calling up/modifying unit of
temperature
<P. 8> Setting of unit for pressure See section Calling up/modifying unit of
pressure
<P. 9> Selection for function: Automatic restart
after voltage failure (active or not, only for
Atlas Copco) See section Activating automatic restart
<P. 10> Selection between Y-D or DOL starting See section Selection between Y-D or DOL
starting
<P. 11> Setting of load delay time See section Calling up/modifying load
delay time
<P. 12> Setting of minimum stop time See section Calling up/Modifying minimum
stop time
<P. 13> Setting a password See section Activating password protection
<P. 14> Remote pressure sensing See section Activate Load/Unload remote
sensing
Instruction book
2920 7180 30 37